Ferrari 348/355 Clutch Release Bearing Flange – CRBF-348/355
PART # CRBF-348/355
$1,530.31
Available In StockIn our local warehouse and ships same day if ordered by 5pm EST
Description
Clutch Release Bearing Flange
Fits the following:
348
F355
Part Number: CRBF-348/355
Replaces part number 168589
Hill Engineering’s Clutch release bearing flange – (#168589)
Used mainly to upgrade 348 & early 355’s so that they can use the later style clutch release bearings.
Comes complete with 2 x #65928500 at no extra cost (these must be fitted by the customer).
CRB355MS / #168594 should only be fitted the later style flange (CRBF 348/355 – #168589) & 158209 (late 355). An easy way to tell if you have the later flange is by measuring the spring hole centers shown in the additional image above. Early flanges have a dimension of 82mm while the later flange as shown has 86mm.
Please note that this flange is not a replacement for the late 355 flange #158209.
Valid from gearbox Nr. 2439 and till Nr. 2715 for complete gearbox 168372 – Not for complete gearbox 174037.
(Also Valid up to Gearbox Nr. 2438 when using CRB-355MS Clutch Release Bearing)
Please note that this part does not come with seal or O-rings – See SK-CRBF-348/355
Fits the following vehicles
5 vehicles · 5 positions
Ferrari 348 GTB/GTS/GTC/Spider1 position
| Item No. | Diagram (page) | Qty |
|---|---|---|
| 19 | 024 CLUTCH AND CONTROLS | 1 |
Ferrari 348 tb/ts1 position
| Item No. | Diagram (page) | Qty |
|---|---|---|
| 19 | 021 Clutch - Controls | 1 |
Ferrari F355 B/GTS/Spider Mo. 2.71 position
| Item No. | Diagram (page) | Qty |
|---|---|---|
| 26 | 024 Clutch And Controls | 1 |
Ferrari F355 B/GTS/Spider Mo. 5.2 / ABS Bosch F11 position
| Item No. | Diagram (page) | Qty |
|---|---|---|
| 69 | 024 Clutch Control | 1 |
Ferrari Mondial t Coupe & Cabriolet1 position
| Item No. | Diagram (page) | Qty |
|---|---|---|
| 30 | 029 Clutch And Controls | 1 |
